Transfer Cars
West Bend Equipment has extensive experience designing and building transfer cars for many applications, including handling steel coils, molds and dies, radioactive waste containers, fabricated structures and machine sub-assemblies.
Engineered to your specifications, West Bend Equipment can build transfer cars to handle a full range of loads. Basic drive systems may include:
- AC electric motor fed by cable reel, enclosed conductor bars or festoon system
- DC electric motor powered by 24V or greater battery pack
- Hydraulic motor powered by propane fueled internal combustion engine
 |
Coil Transfer CarsThese fully automated coil transfer cars are track mounted. They were designed to move steel coils weighing 42 tons. They can handle coils up to a maximum diameter of 80 inches and a maximum width of 72 inches. |
|
|
Rail Traveling Coil Mounter
Engineered according to your specifications, West Bend Equipment rail travel coil mounters are built to handle a full range of coil sizes and weights. These multi-function machines are designed to accept palletized or unpalletized coils with the eye to the sky, tip 90 degrees to eye horizontal, lift the coil to align the eye with the mandrel and drive forward on the track to mount the coil. Slit coils can be removed by reversing this procedure.
We also offer a complete range of other coil handling equipment with capacities to 50 tons. Call West Bend Equipment for additional information on coil mounters and other custom-engineered material handling products.
Tow-Type Transfer Car
Fabricated of heavy-duty welded steel, the non-powered mold cart is a durable and inexpensive addition to your mold-transfer operation. The top platform is fitted with super-rail roller sections for precise mold positioning. Its load torque features a fabricated steel hitch pin at one end to allow the cart to be moved throughout the plant with a forklift or other material handling truck.
|
 |
Free-Ranging Coil MounterThis free-ranging, custom-built coil mounter is designed to move easily throughout coil processing plants. Like West Bend Equipment’s rail-mounted models, these units are designed to handle a wide range of sizes and weights.
Available with 12- or 24-volt DC motors, these steerable, walk-along coil mounter units are ideal for handling steel and wire coils as well as rolled products like paper and plastic.
Standard features of these coil mounter units include batteries and built-in chargers.
Many options are available on West Bend coil mounters including non-marring surfaces to minimize damage to special materials.
These multi-function machines combine the benefits of fork trucks, upenders and coil cars to maximize productivity. They are designed to transport, tip 90 degrees, and mount palletized or unpalletized coils, whether single or stacked.
Coils in the eye to the sky position are loaded onto this unit and moved to the processing area. The coil is then tipped 90 degrees to the eye horizontal position. The coil is raised to align the eye with the centerline of the mandrel and moved forward. Slit or full coils are removed by reversing this procedure. |
We also offer a line of custom die carts, upenders, inverters transfer cars and lift tables engineered for your specific application.
Download Coil Mounter Technical Data Sheet (PDF)
 |
Electric Motor-driven, Pendant-controlled Transfer CarThis 50-metric ton capacity transfer car can transport two 25-metric ton coils. Replaceable wear pads protect the coil surface. |
 |
Fully Automated Coil Car42 ton fully automated coil car in a coil storage warehouse. |
 |
Battery Powered Transfer CarThis 20,000-pound capacity transfer car is used to move stamping dies. The transfer car is battery powered, eliminating the need for a cable reel or other external means of getting electrical power to the car. |
 |
Coil Transfer Cars with Scissor Lift and TurntableThese two West Bend scissors lift coil transfer cars have power rotation. They are rated for 15,000-pound capacity and have been designed to handle aluminum coils, 62” by 56” wide. The coil is supported by gravity type rollers to allow for proper coil tail orientation. |
| 
